|Table of Contents|

Low-viscosity regulation and performance of C60 concrete(PDF)

长安大学学报(自然科学版)[ISSN:1006-6977/CN:61-1281/TN]

Issue:
2023年3期
Page:
56-66
Research Field:
桥梁与隧道工程
Publishing date:

Info

Title:
Low-viscosity regulation and performance of C60 concrete
Author(s):
ZHANG Feng12 BAI Yin12 LYU Le-le12 CHEN Bo12 NING Feng-wei12 HU Hai-ming12
(1. Nanjing Hydraulic Research Institute, Nanjing 210029, Jiangsu, China; 2. State Key Laboratory of Hydrology-Water Resources and Hydraulic Engineering, Nanjing 210024, Jiangsu, China)
Keywords:
bridge engineering pumped concrete viscosity yield shear stress pumping pressure loss CFD simulation
PACS:
U444
DOI:
10.19721/j.cnki.1671-8879.2023.03.006
Abstract:
In order to solve the high head pumping problem of high-strength and low-flow concrete, the influence of low-viscosity regulation measures such as 5 to 10 mm particle size gravel, grade Ⅰ fly ash, air-entraining agent, thixotropic agent and viscosity reducer on the working performance and rheological properties of C60 concrete were studied, and the effect of different regulation measures on the pumping pressure loss of concrete was also studied based on CFD numerical simulation. On this basis, the mix proportion of low-flow high-performance C60 prestressed concrete was optimized. The results show that all the five low-viscosity measures can increase the slump and spread of the mixture, and decrease the viscosity and yield shear stress. The addition(mass fraction, the same below)of 15% grade Ⅰ fly ash or 0.001% viscosityreducer can reduce the viscosity of the mixture by 21% to 25%, and adding 0.005% air-entraining agent(4.8% gas content)can reduce the yield shear stress by 70%. The low-flow concrete flows in the form of plunger flow in the pump tube. The increase of the viscosity of the mixture and the yield shear stress will cause the increase of pumping pressure loss, and the viscosity has a more obvious effect on the pump pressure loss. The increase of viscosity and yield shear stress will lead to the increase of pumping pressure loss, and the effect of viscosity on pumping pressure loss was more obvious. The five kinds of low-viscosity measures can all reduce the pressure loss of concrete flowing in the pipeline, and the addition of 0.001% viscosity reducer can reduce the pressure loss by 50% to 53%. The optimized C60 prestressed concrete mixture has a viscosity of 120 to 135 Pa?s,a yield shear stress of 235 to 252 Pa, 7 d compressive strength can reach 72.1 to 75.3 MPa, and dry shrinkage of -0.04% at 120 d.11 tabs, 10 figs, 30 refs.

References:

[1] 缪昌文,刘建忠.应用高强混凝土应注意的几个问题[J].施工技术,2013,42(10):1-5.
MIAO Chang-wen,LIU Jian-zhong.Issues for attention during the application of high strength concrete[J].Construction Technology,2013,42(10):1-5.
[2]宋沛霖.高强混凝土用高保坍降粘型聚羧酸减水剂的试验研究[D].济南:山东建筑大学,2019.
SONG Pei-lin.Experimental study on the use of high anti-collapse and viscosity-reducing polycarboxylate superplasticizer for high strength concrete[D].Jinan:Shandong Jianzhu University,2019.
[3]KWAN A K H,WONG H H C.Effects of packing density,excess water and solid surface area on flowability of cement paste[J].Advances in Cement Research,2008,20(1):1-11.
[4]ZHAN J B,AN X H,DING N.Effect of fine aggregate characteristics on the thresholds of self-compacting paste rheological properties[J].Construction and Building Materials,2016,116:355-365.
[5]张 磊,王 超,李京川,等.泵送混凝土压力损失试验研究[J].施工技术,2014,43(6):50-53.
ZHANG Lei,WANG Chao,LI Jing-chuan,et al.Experimental study on pressure loss of pumping concrete[J].Construction Technology,2014,43(6):50-53.
[6]FERRARIS C F,OBLA K H,HILL R.The influence of mineral admixtures on the rheology of cement paste and concrete[J].Cement & Concrete Research,2001,31(2):245-255.
[7]沈 锐.降低UHPC拌合物粘度的技术措施[D].重庆:重庆大学,2018.
SHEN Rui.Technical measures to reduce the viscosity of UHPC mixtures[D].Chongqing:Chongqing University,2018.
[8]STRUBLE L,SUN G K.Viscosity of Portland cement paste as a function of concentration[J].Advanced Cement Based Materials,1995,2(2):62-69.
[9]徐永波.高强混凝土的性能特点分析及其改进措施[J].安徽建筑,2015,22(3):174-176.
XU Yong-bo.Performance features analysis of high strength concrete and its improvement measures[J].Anhui Architecture,2015,22(3):174-176.
[10]魏素梅,关战军.配制高强混凝土的关键技术[J].四川建材,2013,39(4):24-25.
WEI Su-mei,GUAN Zhan-jun.Key technology of preparing high strength concrete[J].Sichuan Building Materials,2013,39(4):24-25.
[11]ARORA A,AGUAYO M,HANSEN H,et al.Microstructural packing- and rheology-based binder selection and characterization for ultra-high performance concrete(UHPC)[J].Cement and Concrete Research,2018,103:179-190.
[12]张倩倩,刘建忠,周华新,等.超高性能混凝土流变特性及其对纤维分散性的影响[J].材料导报,2017,31(23):73-77.
ZHANG Qian-qian,LIU Jian-zhong,ZHOU Hua-xin,et al.Rheological properties of ultra-high performance concrete and its effect on the fiber dispersion within the material[J].Materials Review,2017,31(23):73-77.
[13]SHI Y X,MATSUI I,FENG N Q.Effect of compound mineral powders on workability and rheological property of HPC[J].Cement and Concrete Research,2002,32(1):71-78.
[14]ZHU W Z,GIBBS J C.Use of different limestone and chalk powders in self-compacting concrete[J].Cement and Concrete Research,2005,35(8):1457-1462.
[15]WANG C,YANG C H,LIU F,et al.Preparation of ultra-high performance concrete with common technology and materials[J].Cement and Concrete Composites,2012,34(4):538-544.
[16]SONG Q L,YU R,WANG X P,et al.A novel self-compacting ultra-high performance fibre reinforced concrete(SCUHPFRC)derived from compounded high-active powders[J].Construction and Building Materials,2018,158:883-893.
[17]刘建忠,张倩倩,刘加平,等.一种高与超高强混凝土降粘剂、其制备方法及其应用:中国,CN104529225A[P].2015-04-22.
LIU Jian-zhong,ZHANG Qian-qian,LIU Jia-ping,et al.Method for preparing viscosity-reduction-type polycarboxylic acid superplasticizer and application of viscosity-reduction-type polycarboxylic acid superplasticizer:China,CN104529225A[P].2015-04-22.
[18]西川朋孝,宇野亨,山本弘一,等.多羧酸混凝土外加剂:中国,CN1784369[P].2006-06-07.
TOMOTAKA N,HARU U,KOICHI Y,et al.Polycarboxylic acid concrete admixture:China,CN1784369A[P].2006-06-07.
[19]EDE A N.The resistance of concrete pumped through pipelines[J].Magazine of Concrete Research,1957,9(27):129-140.
[20]刘 豫.新拌混凝土流变的测量、模型及其应用[D].北京:中国建筑材料科学研究总院,2020.
LIU Yu.Rheological measurement,models and their applications for fresh concrete[D].Beijing:China Building Materials Academy,2020.
[21]黎梦圆.新拌水泥基材料非线性流变模型的研究与应用[D].北京:清华大学,2018.
LI Meng-yuan.Nonlinear rheological modeling of fresh cementitious materials[D].Beijing:Tsinghua University,2018.
[22]阎培渝,黎梦圆,韩建国,等.新拌混凝土可泵性的研究进展[J].硅酸盐学报,2018,46(2):239-246.
YAN Pei-yu,LI Meng-yuan,HAN Jian-guo,et al.Recent development on pumpability of fresh concrete[J].Journal of the Chinese Ceramic Society,2018,46(2):239-246.
[23]KAPLAN D,LARRARD F D,SEDRAN T.Design of concrete pumping circuit[J].ACI Materials Journal,2005,102(2):110-117.
[24]FEYS D,KHAYAT K H,KHATIB R.How do concrete rheology,tribology,flow rate and pipe radius influence pumping pressure?[J].Cement and Concrete Composites,2016,66:38-46.
[25]周玉鹏.新拌混凝土流动行为及泵送吸料性能提升研究[D].湘潭:湘潭大学,2021.
ZHOU Yu-peng.Research on fresh concrete flow behavior and the improvement of pumping suction performance[D].Xiangtan:Xiangtan University,2021.
[26]魏子易.基于CFD模拟的新拌混凝土泵送过程中流动行为的研究[D].北京:中国建筑材料科学研究总院,2019.
WEI Zi-yi.Study on flow behavior of fresh concrete during pumping using CFD simulation[D].Beijing:China Building Materials Academy,2019.
[27]李 悦,田小璇,金彩云,等.基于CFD的泵送混凝土流变性能数值模拟研究[J].硅酸盐通报,2020,39(4):1139-1144,1152.
LI Yue,TIAN Xiao-xuan,JIN Cai-yun,et al.Numerical simulation of rheological properties of pumped concrete based on CFD[J].Bulletin of the Chinese Ceramic Society,2020,39(4):1139-1144,1152.
[28]MORSI S A,ALEXANDER A J.An investigation of particle trajectories in two-phase flow systems[J].Journal of Fluid Mechanics,1972,55(2):193.
[29]CHOI M,ROUSSEL N,KIM Y,et al.Lubrication layer properties during concrete pumping[J].Cement and Concrete Research,2013,45:69-78.
[30]JO S D,PARK C K,JEONG J H,et al.A computational approach to estimating a lubricating layer in concrete pumping[J].Computers,Materials & Continua,2012,27(3):189-210.

Memo

Memo:
-
Last Update: 2023-06-30