|Table of Contents|

Software development method based on AUTOSAR for automobile ECU(PDF)

长安大学学报（自然科学版）[ISSN:1006-6977/CN:61-1281/TN]

Issue:
2013年03期
Page:
76-80,87
Research Field:
汽车与机械工程
Publishing date:

Info

Title:
Software development method based on AUTOSAR for automobile ECU
Author(s):
LIU Xi-bin1; 2;  MA Jian1;  SONG Qing-song2; 3
1. School of Automobile, Chang'an University, Xi'an 710064, Shaanxi, China; 2. Shaanxi Heavy-duty Automobile Co Ltd, Xi'an 710043, Shaanxi, China; 3. School of Information Engineering, Chang'an University, Xi'an 710064, Shaanxi, China
Keywords:
automobile engineering;  electric vehicle;  automotive electronic;  embedded controller unit;  software architecture
PACS:
U469.72
DOI:
-
Abstract:
Aimed at the shortcomings of traditional automobile ECU development methods for the whole vehicle system-level analysis and modeling, and based on the basic theories of automobile open system architecture(AUTOSAR), the hierarchical modular system architecture and the inter-layer interfaces for AUTOSAR were explained at first, and then, an implementation process consisting of two phases, i.e., architecture definition phase and ECU configuration phase, was established. And finally, combined with typical AUTOSAR tools on market, a systematical resolution for automobile ECU software development was proposed. The results show that the proposed resolution is simple and efficient, which can ensure the expansibility, modular reuse and reliability of the electric control software system of the whole vehicle. This study is significance for high reliability and low cost automobile ECU system development. 6 figs, 14 refs.

References:

[1] Heinecke H.Automobile system design-challenges and potential[C]//IEEE.Proceedings of the Design,Automation and Test in Europe,IEEE Computer Society.Washington DC:IEEE,2005:656-657.
[2]Alberto S V,Marco D N.Embedded system design for automotive applications[J].Computer,2007,40(10):42-51.
[3]Rajnak A,Kumar A.Computer-aided architecture design & optimized implementation of distributed automotive EE systems[C]//IEEE.Proceedings of the 44th ACM/IEEE Design Automation Conference.San Diego:IEEE,2007:556-561.
[4]魏学哲,戴海峰,孙泽昌.汽车嵌入式系统开发方法、体系架构和流程[J].同济大学学报:自然科学版,2012,40(7):1064-1070. WEI Xue-zhe,DAI Hai-feng,SUN Ze-chang.Methodology,architecture and development flow of automotive embedded systems[J].Journal of Tongji University:Natural Science,2012,40(7):1064-1070.(in Chinese)
[5]方 遒,姜瑜涛,张晓先,等.汽车电子基础软件标准体系研究[J].信息技术与标准化,2011(8):30-33. FANG Qiu,JIANG Yu-tao,ZHANG Xiao-xian,et al.Research on standard system of automobile electronics fundamental software[J].Information Technology and Standardization,2011(8):30-33.(in Chinese)
[6]杨国青.基于模型驱动的汽车电子软件开发方法研究[D].杭州:浙江大学,2006. YANG Guo-qing.Research on model-based design approaches for automotive electronics[D].Hangzhou:Zhejiang University,2006.(in Chinese)
[7]Heinecke H,Damm W,Josko B,et al.Software components for reliable automotive systems[C]//IEEE.Proceedings of Design,Automation and Test in Europe(EDAA).Munich:IEEE,2008:549-554.
[8]AUTOSAR Consortium[S/OL].
[2012-08-11].http://www.autosar.org/.
[9]罗 端,李 红,方 正,等.基于AUTOSAR的汽车电子诊断系统的开发[J].汽车工程, 2012, 34(2):179-183. LUO Duan,LI Hong,FANG Zheng,et al.Development of vehicle electronic diagnostic system based on AUTOSAR[J].Automotive Engineering,2012,34(2):179-183.(in Chinese)
[10] Kum D,Park G M,Lee S,et al.AUTOSAR migration from existing automotive software[C]//IEEE.Proceedings of International Conference on Control,Automation and Systems(ICCAS).Seoul:IEEE,2008:558-562.
[11]Vo G N,Lai R,Garg M.Building automotive software component within the Autosar environment a case study[C]//IEEE.Proceedings of the 9th International Conference on Quality Software.Jeju:IEEE,2009:191-200.
[12]Sara D,Jakob A,Joakin F.Effect analysis of the introduction of AUTOSAR-a systematic literature review[C]//IEEE.Proceedings of the 37th Euromicro Conference on Software Engineering and Advanced Applications.Oulu:IEEE,2011:239-246.
[13]Huang B,Dong H,Wang D.et al.Basic concepts on AUTOSAR development[C]//IEEE.Proceedings of the International Conference on Intelligent Computation Technology and Automation.Changsha:IEEE,2010:871-873.
[14]阴晓峰,刘武东.汽车电子系统软件开发新标准AUTOSAR[J].西华大学学报:自然科学版,2010,29(2):102-106. YIN Xiao-feng,LIU Wu-dong.AUTOSAR— a new standard of software development for automotive electronic systems[J].Journal of Xihua University:Natural Science,2010,29(2):102-106.(in Chinese)

Memo

Memo:
-
Last Update: 2013-05-30