|Table of Contents|

Analysis and application of thin-walled rail with variable section for crashworthiness(PDF)

长安大学学报(自然科学版)[ISSN:1006-6977/CN:61-1281/TN]

Issue:
2010年01期
Page:
88-94
Research Field:
Publishing date:
2010-02-20

Info

Title:
Analysis and application of thin-walled rail with variable section for crashworthiness
Author(s):
WU He-quan1 YANG Jia-xing2 XIN Yong3
1. School of Automotive and Mechanical Engineering, Changsha University of Science and Technology, Changsha 410114, Hunan, China; 2. Department of Mechanical Engineering, Jiangxi Bluesky University, Nanchang 330098, Jiangxi, China; 3. School of Mechanical and Electrical Engineering, Nanchang University, Nanchang 330031, Jiangxi, China
Keywords:
automobile engineering optimal design thin-walled rail with variable section crashworthiness energy absorption
PACS:
U461
DOI:
-
Abstract:
An effective structure of thin-walled rail with variable section was proposed by comparing a variety of thin-walled rails with different section features. Several design parameters of the structure were used to optimize the rail's structure. Optimal design method was presented and utilized to obtain optimal crashworthiness design of the thin-walled rail with variable section. The quadratic models for energy absorption and maximum impact force were created using response surface methodology exploiting finite element analysis results. The optimal parameter values and the Pareto optimal solution were found with the software of Matlab. Then the optimal results were verified through the finite element analysis of thin-walled rail. The optimal thin-walled rail with variable section was used in an off-road vehicle's 40% offset-barrier impact model and the passive safety of the vehicle was improved a lot. 3 tabs, 12 figs, 12 refs.

References:

[1] Wierzbicki T,Abramowicz W.On the crushing me-chanics of thin-walled structures[J].Journal of Applied Mechanics,1983,50(1):727-734.
[2]Abramowicz W,Jones N.Dynamic axial crushing of circular tubes[J].International Journal of Impact Engineering,1984,2(3):263-281.
[3]Johnson W,Soden P D,Al-Hassani S T S.Inextensional collapse of thin-walled tubes under axial compression[J].Journal of Strain Analysis,1977,12(1):317-330.
[4]Mahmood H F,Paluszny A.Design of thin walled columns for crash energy management-their strength and mode of collapse[J].SAE Paper,1981,811302.
[5]Mamalis A G,Johnson W.The quasi-static crumpling of thin walled circular cylinders and frusta under axial compression[J].International Journal of Mechanical Sciences,2007,25(1):713-732.
[6]Sheriffa N M,Gupta N K.Optimization of thin conical frusta for impact energy absorption[J].Thin-Walled Structures,2008,46(1):653-666.
[7]Sparke L J,Tomas J A.Crash pulse optimization for minimum injuring risk to car occupants[J].SAE Paper,1994,945162.
[8]王大志.基于乘员保护的汽车正面碰撞结构设计与变形控制研究[D].北京:清华大学,2006.
[9]朱西产,钟荣华.薄壁直梁件碰撞吸能计算机仿真方法的研究[J].汽车工程,2000,22(2):85-89. ZHU Xi-chan,ZHONG Rong-hua.A study on crashworthiness of the thin walled column by computer simulation[J].Automotive Engineering,2000,22(2):85-89.
[10]侯淑娟.薄壁构件的抗撞性优化设计[D].长沙:湖南大学,2007.
[11]Fang H,Rais R M,Liu Z,et al.A comparative study of metamodeling methods for multiobjective crashworthiness optimization[J].Computers and Structures,2005,83(1):2121-2136.
[12]Liu Y C,Day M L.Development of simplified finite element model for straight thin-walled tubes with octagonal cross section[J].International Journal of Crashworthiness,2007,12(5):503-508.

Memo

Memo:
-
Last Update: 2010-02-20