[1]聂少锋,周天华,周绪红,等.冷弯薄壁型钢四肢拼合箱形柱轴压性能试验[J].长安大学学报(自然科学版),2017,37(03):72-81.
 NIE Shao-feng,ZHOU Tian-hua,ZHOU Xu-hong,et al.Experiment on cold-formed steel quadruple-limb built-up box section columns under axial compression[J].Journal of Chang’an University (Natural Science Edition),2017,37(03):72-81.
点击复制

冷弯薄壁型钢四肢拼合箱形柱轴压性能试验()
分享到:

长安大学学报(自然科学版)[ISSN:1006-6977/CN:61-1281/TN]

卷:
第37卷
期数:
2017年03期
页码:
72-81
栏目:
桥梁与隧道工程
出版日期:
2017-05-31

文章信息/Info

Title:
Experiment on cold-formed steel quadruple-limb built-up box section columns under axial compression
作者:
聂少锋周天华周绪红霍洋洋孙玉金
1. 长安大学 建筑工程学院,陕西 西安 710061;2. 重庆大学 土木工程学院,重庆 400044
Author(s):
NIE Shao-feng ZHOU Tian-hua ZHOU Xu-hong HUO Yang-yang SUN Yu-jin
1. School of Civil Engineering, Chang’an University, Xi’an 710061, Shaanxi, China; 2. School of Civil Engineering, Chongqing University, Chongqing 400044, China
关键词:
结构工程冷弯型钢拼合箱形柱轴压性能试验研究破坏模式模拟分析
Keywords:
structural engineering cold-formed steel built-up box section column axial compression performance experimental study failure mode simulation analysis
分类号:
TU392.5
文献标志码:
A
摘要:
为了解冷弯薄壁型钢拼合箱形截面立柱的受力性能,对21根不同长细比的冷弯薄壁型钢单肢C形、U形及四肢拼合箱形截面立柱的轴压受力性能进行了试验研究,获得了试件的极限承载力和荷载位移曲线,分析试件的屈曲模式和破坏特征,并采用《冷弯薄壁型钢结构技术规范》(GB 50018—2002)的有效宽厚比法、北美规范(AISI S100—2007)的有效宽度法、直接强度法及简单叠加法对拼合柱的极限承载力进行了计算和对比分析;采用ABAQUS软件建立了考虑材料、几何和接触非线性的有限元模型,对试验试件的轴压性能进行模拟分析,并将数值分析得到的破坏特征、荷载轴向位移曲线与试验结果进行对比分析,验证了有限元方法的正确性;进而采用经验证的有限元模型对该类拼合柱轴压性能的影响因素(包括长细比、螺钉间距和腹板高厚比等)进行分析。研究结果表明:单肢中长柱试件破坏模式为局部屈曲和整体弯曲失稳,单肢短柱试件破坏模式为局部屈曲和畸变屈曲;中长拼合柱试件最终破坏模式为绕弱轴整体弯曲,短柱试件破坏模式为局部塑性折曲;拼合柱的极限承载力和刚度随长细比的增大逐渐降低,长细比大于30的箱形柱拼合效果显著,螺钉连接可以满足各肢协同工作的要求,长细比较小的箱形柱拼合效果差;采用简单叠加法计算承载力偏于不安全;减小箱形柱截面的腹板高厚比,其轴压极限承载力和刚度将显著提高。
Abstract:
To understand the mechanical properties of cold-formed steel built-up box section columns, the mechanical behaviors of 21 specimens of cold-formed steel single C-shaped, U-shaped and quadruple-limb built-up box section columns with different slenderness ratios were tested under axial compression load. The ultimate capacity and load-displacement curves of specimens were obtained. The flexural mode and failure characteristics were described in detail. The ultimate capacities of built-up specimens were calculated and comparatively analyzed by “effective ratio of width to thickness” in “Technical code of cold-formed thin-wall steel structures” (GB 50018—2002), “effective width method” and “direct strength method (DSM)” in “North American specification for the design of cold-formed steel structural members” (AISI S100—2007) and “simple superposition method”. Finite element models considering materials, geometric and contact nonlinearities were established by finite software ABAQUS to simulate and analyze the mechanical behaviors of the test specimens under axial compression. Furthermore, failure characteristics and load-axial displacement curves obtained by numerical analysis were comparatively analyzed with the experimental results so as to verify the validity of finite element methods. Influencing factors on behaviors of columns under axial compression, including slenderness ratio, spacing of screws and height-thickness ratio of web were analyzed through the proved FEM. The results show that the failure mode of middle and long single columns is local buckling and overall flexural buckling instability, while the failure mode of short single columns is local buckling and distortional buckling. Ultimate failure mode of middle and long built-up columns is overall flexural buckling around the weak axis, while that of the short columns is local plastic cripple. The ultimate bearing capacity and stiffness of built-up columns gradually decrease with the increase of slenderness ratio. For columns whose slenderness ratio is greater than 30, the built-up effect is obvious, therefore the screw connections can meet the requirements of making basic members work together cooperatively. For columns whose slenderness ratio is smaller, the built-up effect is weak, so it is non-conservative to calculate capacity by simple superposition method. The ultimate axial bearing capacity and stiffness of built-up box section specimens significantly increase with the decrease of height-thickness ratio of web.

相似文献/References:

[1]李新忠,魏雪英,赵均海.混凝土力学性能的应变率效应[J].长安大学学报(自然科学版),2012,32(02):82.
 LI Xin-zhong,WEI Xue-ying,ZHAO Jun-hai.Strain rate effect on mechanical properties of concrete[J].Journal of Chang’an University (Natural Science Edition),2012,32(03):82.
[2]王春玲,王爱勤,吴艳红.弹性半空间地基上正交异性矩形中厚板的弯曲[J].长安大学学报(自然科学版),2012,32(02):87.
 WANG Chun-ling,WANG Ai-qin,WU Yan-hong.Bending of orthotropic rectangular middle thick plate on elastic half-space foundation[J].Journal of Chang’an University (Natural Science Edition),2012,32(03):87.
[3]杨富社,徐春龙,王晋国.基于地震响应时程的多层轻钢结构特性[J].长安大学学报(自然科学版),2012,32(04):55.
 YANG Fu-she,XU Chun-long,WANG Jin-guo.Structural property of multi-layer lightweight steel based on seismic response time history[J].Journal of Chang’an University (Natural Science Edition),2012,32(03):55.
[4]苟长飞,叶 飞,张金龙.城市地下空间需求预测及其分布体系建立[J].长安大学学报(自然科学版),2012,32(05):58.
 GOU Chang-fei,YE Fei,ZHANG Jin-long.Demand forecasting and demand distributional system development method of urban underground space[J].Journal of Chang’an University (Natural Science Edition),2012,32(03):58.
[5]刘 鸣,刘伯权.钢筋混凝土柱低周疲劳力学性能分析[J].长安大学学报(自然科学版),2012,32(05):65.
 LIU Ming,LIU Bo-quan.Low-cycle fatigue damage for shear behavior of reinforced concrete columns[J].Journal of Chang’an University (Natural Science Edition),2012,32(03):65.
[6]万战胜,夏永旭,韩瑞昌.化学锚栓的高温力学性能试验[J].长安大学学报(自然科学版),2010,30(01):63.
 WAN Zhan-sheng,XIA Yong-xu,HAN Rui-chang.Experimental research on mechanic behavior under high temperature of chemistry anchor bolts[J].Journal of Chang’an University (Natural Science Edition),2010,30(03):63.
[7]张志权,赵均海,张玉芬,等.复合钢管混凝土柱轴压承载力的计算[J].长安大学学报(自然科学版),2010,30(01):67.
 ZHANG Zhi-quan,ZHAO Jun-hai,ZHANG Yu- fen,et al.Axial bearing capacity of composite concrete-filled steel tubular columns[J].Journal of Chang’an University (Natural Science Edition),2010,30(03):67.
[8]丁江澍,刘伯权,冼耀强.空间错位双排密贴PHC桩支护结构分析[J].长安大学学报(自然科学版),2010,30(04):66.
 DING Jiang-shu,LIU Bo-quan,XIAN Yao-qiang.Analysis of retaining structure with space double-row layout dislocation PHC piles[J].Journal of Chang’an University (Natural Science Edition),2010,30(03):66.
[9]陈 峰,郑建岚.自密实混凝土与老混凝土的粘结-滑移性能[J].长安大学学报(自然科学版),2010,30(06):56.
 CHEN Feng,ZHENG Jian-lan.Bond-slip relationship between self-compacting concrete and old concrete[J].Journal of Chang’an University (Natural Science Edition),2010,30(03):56.
[10]李炳宏,江世永,飞 渭.基于挠度控制方法的BFRP筋混凝土梁抗弯设计[J].长安大学学报(自然科学版),2010,30(06):61.
 LI Bing-hong,JIANG Shi-yong,FEI Wei.Flexural design of concrete beams reinforced with BFRP bars based on deflection control approach[J].Journal of Chang’an University (Natural Science Edition),2010,30(03):61.

更新日期/Last Update: 2017-06-06