[1]秦凤江,狄 谨,周绪红,等.钢箱梁U型肋加劲板受压稳定极限承载力影响因素分析[J].长安大学学报(自然科学版),2017,37(01):58-66.
　QIN Feng-jiang,DI Jin,ZHOU Xu-hong,et al.Analysis on influence factors of stability ultimate bearing capacity of U-rib stiffened plate of steel box girder[J].Journal of Chang’an University (Natural Science Edition),2017,37(01):58-66.
点击复制

钢箱梁U型肋加劲板受压稳定极限承载力影响因素分析()
分享到：

长安大学学报（自然科学版）[ISSN:1006-6977/CN:61-1281/TN]

卷:
第37卷
期数:
2017年01期
页码:
58-66
栏目:
桥梁与隧道工程
出版日期:
2017-01-31

文章信息/Info

Title:
Analysis on influence factors of stability ultimate bearing capacity of U-rib stiffened plate of steel box girder
作者:
秦凤江; 狄 谨; 周绪红; 张 茜; 逯文茹
1. 山地城镇建设与新技术教育部重点实验室(重庆大学)，重庆 400045；2. 长安大学 公路学院，陕西 西安 710064；3. 重庆大学 土木工程学院，重庆 400045；4. 兰州大学 土木工程与力学学院，甘肃 兰州 730000
Author(s):
QIN Feng-jiang;  DI Jin;  ZHOU Xu-hong;  ZHANG Qian;  LU Wen-ru
1. Key Laboratory of New Technology for Construction of Cities in Mountain Area of Ministry of Education(Chongqing University), Chongqing 400045, China; 2. School of Highway, Chang’an University, Xi’an 710064, Shaanxi, China; 3. School of Civil Engineering, Chongqing University, Chongqing 400045, China; 4. School of Civil Engineering and Mechanics, Lanzhou University, Lanzhou 730000, Gansu, China
关键词:
桥梁工程; U型肋加劲板; 稳定极限承载力; 初始几何缺陷; 焊接残余应力; 有限元法
Keywords:
bridge engineering;  U-rib stiffened plate;  stability ultimate bearing capacity;  initial geometric imperfection;  residual stress;  finite element method
分类号:
U448.36
文献标志码:
A
摘要:
钢箱梁因其刚度大、自重轻等优点被广泛应用于桥梁工程中。为了研究钢箱梁U型肋加劲板的受压稳定极限承载力，采用考虑材料和几何双重非线性的有限元法对9块加劲板试件的稳定极限承载力进行了分析，并与试验结果进行了对比验证；采用经过验证的有限元方法分析了母板宽厚比、加劲肋与母板对加劲板形心抗弯刚度比、初始几何缺陷、焊接残余应力共4组参数对U型肋加劲板稳定极限承载力的影响规律。研究结果表明：有限元计算结果与试验结果吻合较好，验证了有限元模拟方法的正确性；母板宽厚比、加劲肋与母板对加劲板形心抗弯刚度比对U型肋加劲板稳定极限承载力的影响显著，并具有良好的规律性；初始几何缺陷对U型肋加劲板稳定极限承载力的影响与加劲板特征值分析的1阶屈曲模态相关，对于1阶屈曲模态为母板局部屈曲的U型肋加劲板而言，当初始几何缺陷达到母板宽度的1/100时，其稳定极限承载力的降幅高达28.34%；焊接残余应力对U型肋加劲板稳定极限承载力的影响也较为显著，考虑焊接残余应力后，U型肋加劲板稳定极限承载力的降幅最大可达到11.1%。研究结果可为钢箱梁U型肋加劲板的进一步研究和推广应用提供参考。
Abstract:
Steel box girder was widely used in bridge engineering due to its high stiffness, light weight and other advantages. In order to investigate the stability ultimate bearing capacity of U-rib stiffened plate under compression, finite element method (FEM) which took geometrical and material nonlinearity into account was used to analyze the stability ultimate bearing capacity of 9 specimens of stiffened plate, and the validity of FEM was verified by comparing the FEM results with the experimental results. Furthermore, a detailed parametric study by using the verified FEM was carried out to determine the influence of width-height ratio, the stiffness ratio between bending stiffness of stiffener to the overall centroid and that of parent plate to the overall centroid, initial geometric imperfections and residual stress on stability ultimate bearing capacity of U-rib stiffened plate. The results show that finite element calculation results are in good agreement with test results, which verifies the correctness of the finite element simulation method. Widthheight ratio and ratio between bending stiffness of stiffener to the overall centroid and that of parent plate to the overall centroid, affect the stability ultimate bearing capacity of U-rib stiffened plate significantly and have a good regularity. Influence of initial geometric imperfections on the stability ultimate bearing capacity of U-rib stiffened plate has correlation with the first order buckling shape of U-rib stiffened plate. For U-rib stiffened plate with the first order local buckling of parent plate, when initial geometric imperfection value reaches to 1/100 of the width, the stability capacity of U-rib stiffened plate reduces by 28.3%. Residual stress also influences the stability ultimate bearing capacity of U-rib stiffened plate significantly. The stability ultimate bearing capacity of U-rib stiffened plate maximally reduces by 11.1% after considering residual stress. The research results can provide reference for further research and application of U-rib stiffened plate of steel box girder.

相似文献/References:

[1]李宇,朱晞,杨庆山,等.高墩大跨桥梁结构的脆弱性分析[J].长安大学学报(自然科学版),2012,32(01):0.
[2]高亮,刘健新,张丹,等.桁架桥主梁三分力系数试验[J].长安大学学报(自然科学版),2012,32(01):0.
[3]刘旭政,王丰平,黄平明,等.斜拉桥各构件校验系数的常值范围[J].长安大学学报(自然科学版),2012,32(01):0.
[4]尚维波,张春宁.高墩刚构桥系梁抗震分析[J].长安大学学报(自然科学版),2012,32(01):0.
[5]邬晓光,李冀弘,宋伟伟.基于改进响应面法的在役PC桥梁承载力可靠性[J].长安大学学报(自然科学版),2012,32(03):53.
　WU Xiao-guang,LI Ji-hong,SONG Wei-wei.Reliability of existing PC bridge based on improved response surface method[J].Journal of Chang’an University (Natural Science Edition),2012,32(01):53.
[6]石雄伟,袁卓亚,马毓泉,等.钢板-混凝土组合加固预应力混凝土箱梁[J].长安大学学报(自然科学版),2012,32(03):58.
　SHI Xiong-wei,YUAN Zhuo-ya,MA Yu-quan,et al.Prestressed concrete box girder strengthened with comsposition of steel plate and concrete[J].Journal of Chang’an University (Natural Science Edition),2012,32(01):58.
[7]李传习,陶 伟,董创文.斜交墩截面刚度与弯曲正应力[J].长安大学学报(自然科学版),2012,32(03):63.
　LI Chuan-xi,TAO Wei,DONG Chuang-wen.Sectional stiffness and bending normal stress of oblique pier[J].Journal of Chang’an University (Natural Science Edition),2012,32(01):63.
[8]邓继华,邵旭东.带铰平面梁元几何非线性有限元分析[J].长安大学学报(自然科学版),2012,32(03):68.
　DENG Ji-hua,SHAO Xu-dong.Geometric nonlinear finite element analysis of plane beam element with hinge[J].Journal of Chang’an University (Natural Science Edition),2012,32(01):68.
[9]蒲广宁,赵 煜,宋一凡.减梁增肋法加固空心板桥的力学性能[J].长安大学学报(自然科学版),2012,32(06):38.
　PU Guang-ning,ZHAO Yu,SONG Yi-fan.Mechanical properties of strengthening hollow slab bridge based on beam-reduction and rib-addition method[J].Journal of Chang’an University (Natural Science Edition),2012,32(01):38.
[10]党 栋,贺拴海,周勇军,等.基于车辆统计数据的汽车荷载标准值取值与评估[J].长安大学学报(自然科学版),2012,32(06):44.
　DANG Dong,HE Shuan-hai,ZHOU Yong-jun,et al.Choosing and assessment for the standard of vehicle load based on vehicle statistical data[J].Journal of Chang’an University (Natural Science Edition),2012,32(01):44.

更新日期/Last Update: 2017-01-22