[1]焦生杰,徐清刚,刘秋宝,等.双钢轮振动压路机与路面有效接触宽度研究及应用[J].长安大学学报(自然科学版),2018,38(02):120-126.
 JIAO Sheng jie,XU Qing gang,LIU Qiu bao,et al.Research and application on effective pavement contact width of doubledrum vibratory roller[J].Journal of Chang’an University (Natural Science Edition),2018,38(02):120-126.
点击复制

双钢轮振动压路机与路面有效接触宽度研究及应用()
分享到:

长安大学学报(自然科学版)[ISSN:1006-6977/CN:61-1281/TN]

卷:
第38卷
期数:
2018年02期
页码:
120-126
栏目:
汽车与机械工程
出版日期:
2018-03-31

文章信息/Info

Title:
Research and application on effective pavement contact width of doubledrum vibratory roller
作者:
焦生杰徐清刚刘秋宝张翠红
(1. 长安大学 公路养护装备国家工程实验室,陕西 西安 710064; 2. 三一重工股份有限公司,湖南 长沙 410100)
Author(s):
JIAO Shengjie XU Qinggang LIU Qiubao ZHANG Cuihong
(1. Highway Maintenance Equipment National Engineering Laboratory, Changan University, Xian 710064,Shaanxi, China; 2. Sany Heavy Industry Co., Ltd., Changsha 410100, Hunan, China)
关键词:
机械工程双钢轮振动压路机有效接触宽度重叠度压实速度振动频率
Keywords:
mechanical engineering doubledrum vibratory roller effective contact width degree of overlap compaction velocity vibration frequency
文献标志码:
A
摘要:
为了提高双钢轮振动压路机对路面的压实质量与压实效率,需确定出良好的压实速度与振动频率的匹配关系。从双钢轮振动压路机与路面的接触截面分析入手,基于半功率点的概念,提出有效接触宽度的概念并建立数学模型;在已有冲击间距理论基础上,引入重叠度来重新定义压实速度与振动频率的对应关系,并将有效接触宽度模型和重叠度值指标应用于沥青混合料压实试验进行验证。研究结果表明:有效接触宽度的概念模型可以作为选择双钢轮振动压路机工艺参数组合时的理论依据,在压实过程中随着碾压遍数的增加,材料由塑性逐渐变为弹性,有效接触宽度修正系数m由0.5~1.0逐渐变化;通过控制重叠度的大小,在相同压实遍数时材料的均匀性不同,当选取的重叠度获得的均匀性较好时,所对应的振动频率与压实速度具有较好的匹配关系;AC13沥青混合料的压实试验结果与理论结果吻合较好,当变异系数为0.4%时既可以保证压实度的均匀性,又可以保证压实效率,得出的压路机高频振动下每遍的压实速度能保证压实质量,路面压实度和平整度均符合沥青混合料高速公路交工验收标准。由有效接触宽度模型和重叠度概念确定的压实速度与振动频率的参数组合为提高路面压实质量提供了理论保障。
Abstract:
In order to improve the compaction quality and compaction efficiency of doubledrum vibratory roller on pavement, the good matching relationship between compaction velocity and vibration frequency was determined. From the analysis on contact section between doubledrum vibratory roller and pavement, and on the basis of halfpower point, the concept of effective contact width of doubledrum vibratory roller was put forward and its mathematical model was presented. Based on the existing impact spacing theory, the degree of overlap was introduced to redefine the corresponding relation of compaction velocity and vibration frequency. And the model of effective contact width and index of overlap degree were used in the compaction test of asphalt mixture to verify it. The results show that the conceptual model of effective contact width can be used as the theoretical basis for selecting the process parameters combination of doubledrum vibratory roller. It can be pointed out that with increasing rolling times in the compaction process, material is changed from plastic to elastic and correction coefficient of effective contact width gradually changes from 0.5 to 1.0. By controlling the size of degree of overlap, materials after the same compaction times will have different degree of uniformity. When the selected degree of overlap obtains good uniformity, the corresponding compaction velocity and vibration frequency has good matching relationship. The compaction test results of AC13 asphalt mixture are in good agreement with the theoretical results. When the variation coefficient is 0.4%, compaction uniformity and compaction efficiency can be guaranteed. Then the compaction velocity of roller in every compaction time under high frequency vibration is also obtained. The pavement compactness and smoothness are in accordance with the acceptance standard of asphalt mixture highway. The parameter combination of compaction velocity and vibration frequency determined by the model of effective contact width and the concept of overlap degree provides a theoretical guarantee for improving the quality of pavement compaction. 2 tabs, 10 figs, 25 refs.

相似文献/References:

[1]罗文军,罗天洪,甘信富,等.基于模糊-PI控制的沥青混凝土摊铺机行驶系统仿真[J].长安大学学报(自然科学版),2012,32(01):0.
[2]刘清涛,蔡宗琰,刘晓婷,等.面向工艺路线的废旧零部件可再制造性评价[J].长安大学学报(自然科学版),2012,32(03):105.
 LIU Qing-tao,CAI Zong-yan,LIU Xiao-ting,et al.Assessment on remanufacturability of waste parts for process route[J].Journal of Chang’an University (Natural Science Edition),2012,32(02):105.
[3]林 涛,刘 学,董忠红,等.大差速比平地机离合器接合过程[J].长安大学学报(自然科学版),2012,32(06):100.
 LIN Tao,LIU Xue,DONG Zhong-hong,et al.Engagement process of motor graders big differential speed ratio clutch[J].Journal of Chang’an University (Natural Science Edition),2012,32(02):100.
[4]刘 钊,焦生杰.工程机械用发动机动力性能评价指标[J].长安大学学报(自然科学版),2012,32(06):106.
 LIU Zhao,JIAO Sheng-jie.Evaluation criterion of engine power properties for construction machinery[J].Journal of Chang’an University (Natural Science Edition),2012,32(02):106.
[5]孟彩茹,李 磊,赵 真,等.沥青搅拌设备振动筛筛箱的动态特性分析[J].长安大学学报(自然科学版),2012,32(02):101.
 MENG Cai-ru,LI Lei,ZHAO Zhen,et al.Dynamic performance analysis of vibrating screen box in asphalt mixer[J].Journal of Chang’an University (Natural Science Edition),2012,32(02):101.
[6]侯劲汝,沈建军,徐 倩.双钢轮振动压路机振幅不均匀性的分析[J].长安大学学报(自然科学版),2010,30(01):100.
 HOU Jing-ru,SHEN Jian-jun,XU Qian.Analysis on uneven amplitude of tandem vibratory roller[J].Journal of Chang’an University (Natural Science Edition),2010,30(02):100.
[7]赵铁栓,焦生杰,叶 敏.振动压路机无级调幅H_2/H_∞控制[J].长安大学学报(自然科学版),2010,30(03):87.
 ZHAO Tie-shuan,JIAO Sheng-gjie,YE Min.H2/H∞ control for stepless amplitude modulation of vibratory roller[J].Journal of Chang’an University (Natural Science Edition),2010,30(02):87.
[8]焦生杰,卡玛尔,林 涛,等.H型液压滤波器的合理应用[J].长安大学学报(自然科学版),2010,30(04):97.
 JIAO Sheng-jie,KAMAL Washahi,LIN Tao,et al.Reasonable application on H type hydraulic filter[J].Journal of Chang’an University (Natural Science Edition),2010,30(02):97.
[9]夏毅敏,薛 静,周喜温.软岩切削过程的三维数值模拟[J].长安大学学报(自然科学版),2010,30(04):102.
 XIA Yi-min,XUE Jing,ZHOU Xi-wen.3-D dimensional numerical simulation of soft rock cutting process[J].Journal of Chang’an University (Natural Science Edition),2010,30(02):102.
[10]顾海荣,焦生杰,肖翀宇,等.全液压路面铣刨机铣刨系统动力学仿真[J].长安大学学报(自然科学版),2010,30(05):103.
 GU Hai-rong,JIAO Sheng-jie,XIAO Chong-yu,et al.Dynamics simulation of milling system used in hydraulic milling machine[J].Journal of Chang’an University (Natural Science Edition),2010,30(02):103.
[11]冯忠绪,侯劲汝,沈建军,等.双钢轮振动压路机功率的配置双钢轮振动压路机功率的配置[J].长安大学学报(自然科学版),2009,29(06):107.
 FENG Zhong xu,HOU Jing ru,SHEN Jian jun,et al.Power balance of doubledrum vibratory roller[J].Journal of Chang’an University (Natural Science Edition),2009,29(02):107.

更新日期/Last Update: 2018-04-03